DIY Hand Casting Kit Private Label Hand Mold Cast Kit for Adults

How to use?

1. powder water ratio: 1 g molding powder needs 3.5-4 ml water.

First, add 2 L of water. Pour the 500 g molding powder and stir quickly.

Note: stirring time should not exceed 2.5 minutes.

2. Put your hand into the molding powder. Do not touch the cup and keep still. Wait for the clone powder to solidify for about 3-5 minutes.

Note: do not move or take out before molding powder solidification.

3. After the molding powder solidifies, shake your hand to reveal the gap, the single hand slowly pulls out.

4. Powder water ratio: 1 kg casting stone need 750 ml water.

First 750 ml water. Pour the casting stone and stir for 1 minute.

5. Slowly inject the casting powder along the inner wall of the clone cavity and beat the vibrating clone cup to remove the bubble.

6. Wait for the casting stone to solidify and harden.

Pour out the model and slowly peel off the hand mold.

What you can get?

Item: Hand casting kit for adults

Molding powder: 500g

Casting stone: 1000g or 1200g

Bucket: 3L

Measuring cup: 1L

Wood stick: 1 pc

De-molding stick: 2 pc

Sandpaper: 2 pcs

Instruction: 1 pc

This is a common configuration.

If you need more accessories, such as gloves or wood base or paintbrushes, cleaning tools, or anything, just contact us!